Description
The SMART CLIMAZON WITH ARTICULATED ARM is a professional thermo-activating hood intended for hair salons. It is designed for services requiring heat application, including colouring, perms, highlights and hair treatments. Equipped with a ventilation system, a temperature control and a 60-minute mechanical timer, it allows the hairdresser to adjust the hood's operation to the different services performed.
The SMART is an analog climazon, whose settings are made directly on the device. Its operation is based on several heating points whose temperature can be adjusted. The professional has a continuous temperature controller to adjust the heat intensity according to the needs of the hair treatment.
The helmet also allows modulating the distribution of heat. Each heating point has an independent on and off button. The hairdresser can thus activate or deactivate the different heating points according to the desired distribution. This individual control distinguishes the SMART from a helmet whose heating elements would all operate simultaneously, without any selection possibility.
The integrated ventilation system completes the thermo-activating function of the helmet. The SMART thus combines ventilation and heat during hairdressing services. The professional can adjust the intensity and the distribution of the heating, two distinct parameters that allow modifying the operating conditions of the device.
The mechanical timer, adjustable up to 60 minutes, allows you to select the desired operating time. The hairdresser can set the time corresponding to the protocol of the product used. This setting is especially relevant for treatments where a heat exposure time must be observed.
During colouring services, the SMART can be used within hair protocols involving the use of a thermo-activating device. It can also be used during permanents, highlighting techniques and certain hair treatments. Temperature and duration settings must be adjusted according to the recommendations of the professional products used during these services.
The SMART is equipped with a wall-mounted articulated arm. This configuration allows the headset to be installed at a hairdressing station without using a floor stand. The arm is used to position the device relative to the chair and to adjust its placement during the preparation of the service.
The fixing of the articulated arm is done by wall anchoring. The system must therefore be installed on a support suitable for this type of fixing.
These dimensions correspond to the thermo-activating part of the SMART. They are distinct from the length of the wall arm, which is an additional element of the whole.
On the electrical level, the SMART has a power of 1 350 W and operates at a voltage of 230 V, with a frequency of 50/60 Hz. It is designed for professional use in hair salons.
The SMART CLIMAZON WITH ARTICULATED ARM thus has independently controlled heating points, continuous temperature adjustment, integrated ventilation and a 60-minute timer. Its wall mounting with articulated arm is suitable for salons wishing to integrate a thermo-activating hood into their workstation.
Features
- Professional thermo-activator climazon hood
- Analogue operation
- Built-in ventilation
- Modulation of the intensity and distribution of heat
- Continuous temperature controller of heating points
- Independent on and off button for each heating point
- Mechanical timer up to 60 minutes
- Suitable for colouring, perming, highlighting and hair treatments
- Wall-mounted articulated arm
- Fixing by wall sealing
- 1 year warranty
Dimensions
| Helmet dimensions: Height | 50 cm |
| Helmet dimensions: Depth | 65 cm |
| Helmet dimensions: Width | 62 cm |
| Dimensions of the articulated arm: Length | 173 cm |
| Dimensions of the articulated arm : Weight | 28 kg |
